Stellite Cobalt Chrome Alloy Saw Tips
Stellite Cobalt Chrome Alloy
- Cobalt Chrome Alloy
- China
- 7-15days
- 1million /month
- Information
Saw tips are made ofCobalt Chrome Alloy,so the following information is all about Cobalt Chrome Alloy .
(1).Stellite Alloy could be considered an intermediate alloy .
(2). It contains a higher fraction of hard, brittle carbides than Cobalt Chrome Alloy
(3).It has increased resistance to low angle erosion, abrasion, and severe sliding wear while stretaining reasonable impact and cavitation resistance.
(4).Cobalt Chrome Alloy is often used self-mated or running against .
What is the Details of our Cobalt Chrome Alloy saw tips ?
Material : | Stellite alloy –Grade Cobalt Chrome Alloy |
Process : | Powder Metallurgy , it is short for PM |
Hardness: | 44-49HRC |
Density : | 8.5g/cm ³ |
Size : | Triangle , rectangle and profiled , customized-made is also available |
Properties : | Wear and corrosion resistance |
Application : | Stellite is also more resistant to the abrasive acids found in some woods like red cedar. |
Instructions : | The Cobalt Chrome Alloy Tipped saws, have a tip welded directly to the saw tooth |
Usage : | Welding on Circular saw and Band saws teeth to cut woods |
Tolerance control : | Surface polishing and tolerance ±0.003”/±0.005” (±0.0762/±0.127mm ) |
Production lead time | Samples 7 days , normal order 10-25 days |
Production capacity : | 1000,000pcs one month. |
Package : | 1000pcs in 1 plastic bag and put in 1 plastic keg |
Stellite tipped saws have shown to be able to:
•Increase run times.
•Cut with thinner kerf.
•Produce a smoother sawn surface.
•Reduce sawing variations - Better cutting accuracy. (allowing for tighter target sizes)
•Reduce the power consumption during cutting.
•Reduce the cutting downtime for saw changes and saw maintenance.
•Increased saw life due to the ability to achieve more sharpening and at longer intervals.
Stellite is also more resistant to the abrasive acids found in some woods like red cedar.
This allows the tips to stay sharp longer than carbide tips and significantly longer
than swaged saw steel when cutting unseasoned woods.
We have produced more than 100 kinds of specifications tips and export to Canada, USA,
France, New Zealand, Australia, Norway and Russia etc. more than 40 countries and areas.
Which size do you supply ?
We can manufacture Saw tips according to your drawings and demands. We can produce rectangular, triangle, specical-shaped saw tips .and we also can manufacture saw tips of U.S.A. standard and Europe standard
Application:
Welding on Circular saw and Band saws teeth to cut woods
Send your inquiry details to us for free samples and best price !
